Speed up model training¶
There are multiple ways you can speed up your model’s time to convergence:
GPU/TPU training¶
Use when: Whenever possible!
With Lightning, running on GPUs, TPUs or multiple node is a simple switch of a flag.
GPU training¶
Lightning supports a variety of plugins to further speed up distributed GPU training. Most notably:
# run on 1 gpu
trainer = Trainer(gpus=1)
# train on 8 gpus, using DDP plugin
trainer = Trainer(gpus=8, accelerator="ddp")
# train on multiple GPUs across nodes (uses 8 gpus in total)
trainer = Trainer(gpus=2, num_nodes=4)
GPU Training Speedup Tips¶
When training on single or multiple GPU machines, Lightning offers a host of advanced optimizations to improve throughput, memory efficiency, and model scaling. Refer to Advanced GPU Optimized Training for more details.
Prefer DDP over DP¶
DataParallelPlugin
performs three GPU transfers for EVERY batch:
Copy model to device.
Copy data to device.
Copy outputs of each device back to master.
Whereas DDPPlugin
only performs 1 transfer to sync gradients, making DDP MUCH faster than DP.
When using DDP plugins, set find_unused_parameters=False¶
By default we have set find_unused_parameters
to True for compatibility reasons that have been observed in the past (see the discussion for more details).
This by default comes with a performance hit, and can be disabled in most cases.
Tip
It applies to all DDP plugins that support find_unused_parameters
as input.
from pytorch_lightning.plugins import DDPPlugin
trainer = pl.Trainer(
gpus=2,
plugins=DDPPlugin(find_unused_parameters=False),
)
from pytorch_lightning.plugins import DDPSpawnPlugin
trainer = pl.Trainer(
gpus=2,
plugins=DDPSpawnPlugin(find_unused_parameters=False),
)
When using DDP on a multi-node cluster, set NCCL parameters¶
NCCL is the NVIDIA Collective Communications Library which is used under the hood by PyTorch to handle communication across nodes and GPUs. There are reported benefits in terms of speedups when adjusting NCCL parameters as seen in this issue. In the issue we see a 30% speed improvement when training the Transformer XLM-RoBERTa and a 15% improvement in training with Detectron2.
NCCL parameters can be adjusted via environment variables.
Note
AWS and GCP already set default values for these on their clusters. This is typically useful for custom cluster setups.
export NCCL_NSOCKS_PERTHREAD=4
export NCCL_SOCKET_NTHREADS=2
Dataloaders¶
When building your DataLoader set num_workers > 0
and pin_memory=True
(only for GPUs).
Dataloader(dataset, num_workers=8, pin_memory=True)
num_workers¶
The question of how many workers to specify in num_workers
is tricky. Here’s a summary of
some references, [1], and our suggestions:
num_workers=0
means ONLY the main process will load batches (that can be a bottleneck).num_workers=1
means ONLY one worker (just not the main process) will load data but it will still be slow.The
num_workers
depends on the batch size and your machine.A general place to start is to set
num_workers
equal to the number of CPU cores on that machine. You can get the number of CPU cores in python using os.cpu_count(), but note that depending on your batch size, you may overflow RAM memory.
Warning
Increasing num_workers
will ALSO increase your CPU memory consumption.
The best thing to do is to increase the num_workers
slowly and stop once you see no more improvement in your training speed.
Spawn¶
When using accelerator=ddp_spawn
or training on TPUs, the way multiple GPUs/TPU cores are used is by calling .spawn()
under the hood.
The problem is that PyTorch has issues with num_workers > 0
when using .spawn()
. For this reason we recommend you
use accelerator=ddp
so you can increase the num_workers
, however your script has to be callable like so:
python my_program.py
TPU training¶
You can set the tpu_cores
trainer flag to 1 or 8 cores.
# train on 1 TPU core
trainer = Trainer(tpu_cores=1)
# train on 8 TPU cores
trainer = Trainer(tpu_cores=8)
To train on more than 8 cores (ie: a POD), submit this script using the xla_dist script.
Example:
python -m torch_xla.distributed.xla_dist
--tpu=$TPU_POD_NAME
--conda-env=torch-xla-nightly
--env=XLA_USE_BF16=1
-- python your_trainer_file.py
Read more in our Accelerators and Plugins guides.
Mixed precision (16-bit) training¶
Use when:
You want to optimize for memory usage on a GPU.
You have a GPU that supports 16 bit precision (NVIDIA pascal architecture or newer).
Your optimization algorithm (training_step) is numerically stable.
You want to be the cool person in the lab :p
Mixed precision combines the use of both 32 and 16 bit floating points to reduce memory footprint during model training, resulting in improved performance, achieving +3X speedups on modern GPUs.
Lightning offers mixed precision or 16-bit training for GPUs and TPUs.
# 16-bit precision
trainer = Trainer(precision=16, gpus=4)
Control Training Epochs¶
Use when: You run a hyperparameter search to find good initial parameters and want to save time, cost (money), or power (environment). It can allow you to be more cost efficient and also run more experiments at the same time.
You can use Trainer flags to force training for a minimum number of epochs or limit to a max number of epochs. Use the min_epochs and max_epochs Trainer flags to set the number of epochs to run.
# DEFAULT
trainer = Trainer(min_epochs=1, max_epochs=1000)
If running iteration based training, i.e. infinite / iterable dataloader, you can also control the number of steps with the min_steps and max_steps flags:
trainer = Trainer(max_steps=1000)
trainer = Trainer(min_steps=100)
You can also interupt training based on training time:
# Stop after 12 hours of training or when reaching 10 epochs (string)
trainer = Trainer(max_time="00:12:00:00", max_epochs=10)
# Stop after 1 day and 5 hours (dict)
trainer = Trainer(max_time={"days": 1, "hours": 5})
Learn more in our Trainer flags guide.
Control Validation Frequency¶
Check validation every n epochs¶
Use when: You have a small dataset, and want to run less validation checks.
You can limit validation check to only run every n epochs using the check_val_every_n_epoch Trainer flag.
# DEFAULT
trainer = Trainer(check_val_every_n_epoch=1)
Set validation check frequency within 1 training epoch¶
Use when: You have a large training dataset, and want to run mid-epoch validation checks.
For large datasets, it’s often desirable to check validation multiple times within a training loop. Pass in a float to check that often within 1 training epoch. Pass in an int k to check every k training batches. Must use an int if using an IterableDataset.
# DEFAULT
trainer = Trainer(val_check_interval=0.95)
# check every .25 of an epoch
trainer = Trainer(val_check_interval=0.25)
# check every 100 train batches (ie: for `IterableDatasets` or fixed frequency)
trainer = Trainer(val_check_interval=100)
Learn more in our Trainer flags guide.
Limit Dataset Size¶
Use data subset for training, validation, and test¶
Use when: Debugging or running huge datasets.
If you don’t want to check 100% of the training/validation/test set set these flags:
# DEFAULT
trainer = Trainer(
limit_train_batches=1.0,
limit_val_batches=1.0,
limit_test_batches=1.0
)
# check 10%, 20%, 30% only, respectively for training, validation and test set
trainer = Trainer(
limit_train_batches=0.1,
limit_val_batches=0.2,
limit_test_batches=0.3
)
If you also pass shuffle=True
to the dataloader, a different random subset of your dataset will be used for each epoch; otherwise the same subset will be used for all epochs.
Note
limit_train_batches
, limit_val_batches
and limit_test_batches
will be overwritten by overfit_batches
if overfit_batches
> 0. limit_val_batches
will be ignored if fast_dev_run=True
.
Note
If you set limit_val_batches=0
, validation will be disabled.
Learn more in our Trainer flags guide.
Preload Data Into RAM¶
Use when: You need access to all samples in a dataset at once.
When your training or preprocessing requires many operations to be performed on entire dataset(s), it can
sometimes be beneficial to store all data in RAM given there is enough space.
However, loading all data at the beginning of the training script has the disadvantage that it can take a long
time and hence it slows down the development process. Another downside is that in multiprocessing (e.g. DDP)
the data would get copied in each process.
One can overcome these problems by copying the data into RAM in advance.
Most UNIX-based operating systems provide direct access to tmpfs through a mount point typically named /dev/shm
.
Increase shared memory if necessary. Refer to the documentation of your OS how to do this.
Copy training data to shared memory:
cp -r /path/to/data/on/disk /dev/shm/
Refer to the new data root in your script or command line arguments:
datamodule = MyDataModule(data_root="/dev/shm/my_data")
Model Toggling¶
Use when: Performing gradient accumulation with multiple optimizers in a distributed setting.
Here is an explanation of what it does:
Considering the current optimizer as A and all other optimizers as B.
Toggling means that all parameters from B exclusive to A will have their
requires_grad
attribute set toFalse
.Their original state will be restored when exiting the context manager.
When performing gradient accumulation, there is no need to perform grad synchronization during the accumulation phase.
Setting sync_grad
to False
will block this synchronization and improve your training speed.
LightningOptimizer
provides a
toggle_model()
function as a
contextlib.contextmanager()
for advanced users.
Here is an example for advanced use-case:
# Scenario for a GAN with gradient accumulation every 2 batches and optimized for multiple gpus.
class SimpleGAN(LightningModule):
def __init__(self):
super().__init__()
self.automatic_optimization = False
def training_step(self, batch, batch_idx):
# Implementation follows the PyTorch tutorial:
# https://pytorch.org/tutorials/beginner/dcgan_faces_tutorial.html
g_opt, d_opt = self.optimizers()
X, _ = batch
X.requires_grad = True
batch_size = X.shape[0]
real_label = torch.ones((batch_size, 1), device=self.device)
fake_label = torch.zeros((batch_size, 1), device=self.device)
# Sync and clear gradients
# at the end of accumulation or
# at the end of an epoch.
is_last_batch_to_accumulate = \
(batch_idx + 1) % 2 == 0 or self.trainer.is_last_batch
g_X = self.sample_G(batch_size)
##########################
# Optimize Discriminator #
##########################
with d_opt.toggle_model(sync_grad=is_last_batch_to_accumulate):
d_x = self.D(X)
errD_real = self.criterion(d_x, real_label)
d_z = self.D(g_X.detach())
errD_fake = self.criterion(d_z, fake_label)
errD = (errD_real + errD_fake)
self.manual_backward(errD)
if is_last_batch_to_accumulate:
d_opt.step()
d_opt.zero_grad()
######################
# Optimize Generator #
######################
with g_opt.toggle_model(sync_grad=is_last_batch_to_accumulate):
d_z = self.D(g_X)
errG = self.criterion(d_z, real_label)
self.manual_backward(errG)
if is_last_batch_to_accumulate:
g_opt.step()
g_opt.zero_grad()
self.log_dict({'g_loss': errG, 'd_loss': errD}, prog_bar=True)
Set Grads to None¶
In order to modestly improve performance, you can override optimizer_zero_grad()
.
For a more detailed explanation of pros / cons of this technique, read this documentation by the PyTorch team.
class Model(LightningModule):
def optimizer_zero_grad(self, epoch, batch_idx, optimizer, optimizer_idx):
optimizer.zero_grad(set_to_none=True)
Things to avoid¶
.item(), .numpy(), .cpu()¶
Don’t call .item()
anywhere in your code. Use .detach()
instead to remove the connected graph calls. Lightning
takes a great deal of care to be optimized for this.
empty_cache()¶
Don’t call this unnecessarily! Every time you call this ALL your GPUs have to wait to sync.
Tranfering tensors to device¶
LightningModules know what device they are on! Construct tensors on the device directly to avoid CPU->Device transfer.
# bad
t = torch.rand(2, 2).cuda()
# good (self is LightningModule)
t = torch.rand(2, 2, device=self.device)
For tensors that need to be model attributes, it is best practice to register them as buffers in the modules’s
__init__
method:
# bad
self.t = torch.rand(2, 2, device=self.device)
# good
self.register_buffer("t", torch.rand(2, 2))